お見積りをご依頼ください
24時間以内にご返信いたします。お急ぎの場合は、WhatsAppまたはWeChat(+8613188932181)までご連絡ください。.
*当社はお客様のプライバシーを尊重し、すべての情報を保護いたします。.
お客様の情報は、お問い合わせへの回答にのみ使用し、未承諾のメールや宣伝メッセージを送信することは一切ありません。.
Yeast is a facultative microorganism — it lives comfortably with oxygen or without it. But have you ever stopped to ask what that actually means inside your fermenter? Why does a splash of oxygen at pitch decide the whole batch? Why does one mole of glucose yield 2822 kJ of energy aerobically but only 209 kJ in fermentation? And what exactly happens across the 12 enzyme steps that turn sugar into ethanol and CO₂? Follow the biochemistry, and every oddity of your fermentation — from lag phase to ester formation — starts to make sense.
Beer fermentation is a complex biochemical transformation. Yeast’s headline products are ethanol and carbon dioxide — but alongside them it builds a whole family of by-products: higher alcohols, esters, aldehydes, acids, ketones and sulfur compounds. These trace substances decide your beer’s flavour, foam, colour and colloidal stability. In other words, fermentation doesn’t just make alcohol — it makes the beer itself.
Depending on the yeast, brewing splits into top fermentation (top-cropping yeast, warmer temperatures) and bottom fermentation (bottom-cropping yeast, cooler temperatures). The two produce beers of distinctly different character:
Traditionally the process divides into primary fermentation (also called main fermentation, where yeast multiplies and most fermentable sugar is consumed) and secondary fermentation (the continuation, run in closed vessels, where residual sugar is slowly converted, CO₂ saturates the beer and it matures). Modern technology has layered new options on this base: high-temperature fermentation, stirred fermentation, pressure fermentation, continuous fermentation, immobilised-yeast fermenters, and the “single-vessel” method where primary and secondary fermentation share one tank — shortening cycle times, raising vessel utilisation, simplifying management, all while safeguarding quality.

The whole fermentation divides roughly into three phases — and because the process runs continuously, primary and secondary fermentation should be read as one interconnected sequence:
Keep one nuance in mind: some by-products are re-partially degraded by the yeast later in the cycle — these formation-and-breakdown dynamics are tied tightly to yeast metabolism, and they deserve your attention.

Yeast can obtain energy in two ways, and the fork in the road is oxygen:
With oxygen present, yeast runs the EMP pathway to pyruvate, feeds it into the TCA cycle, and completely oxidises sugar to water and CO₂, releasing energy. Burning 1 mole of glucose yields 2822 kJ of heat, most of which is transferred to ATP — that stored energy becomes the yeast’s growth engine:
C₆H₁₂O₆ + 6O₂ + 38ADP + 38Pi → 6CO₂ + 6H₂O + 38ATP + heat (aerobic)
Without oxygen, yeast still runs EMP to pyruvate — then decarboxylates and reduces it to ethanol and CO₂. Fermentation is a biological oxidation of sugar, but a stingier one: each mole of glucose releases about 209 kJ, of which only about 96 kJ is transferred into the high-energy bonds of ATP; the rest is lost as heat.
C₆H₁₂O₆ + 2ADP + 2H₃PO₄ → 2CH₃CH₂OH + 2CO₂ + 2ATP + 113 kJ (anaerobic)
During the yeast propagation phase the first situation dominates; during beer fermentation proper, the second. Clearly, the energy from aerobic metabolism far exceeds that from anaerobic metabolism — which is why only a small share of glucose need be oxidised aerobically to fully cover yeast growth and maintenance.


The alcoholic fermentation of glucose runs through 12 reactions in 4 stages. Once you see the map, the enzymes, cofactors and energy pay-offs all fall into place.
Glucose is first activated by two phosphorylations to form reactive fructose-1,6-bisphosphate, priming it for splitting into two three-carbon pieces:
C₆H₁₂O₆ + 2NAD + 2H₃PO₄ + 2ADP → 2CH₃COCOOH + 2NADH₂ + 2ATP (EMP summary, steps 1–10)
Note the elegance: glucose reaches pyruvate by the same EMP route whether oxygen is present or not. Aerobic conditions then drive pyruvate on to full oxidation (water + CO₂); anaerobic conditions turn it toward ethanol and CO₂.
Overall: C₆H₁₂O₆ + 2ADP + 2H₃PO₄ → 2CH₃CH₂OH + 2CO₂ + 2ATP + 113 kJ

| # | Substrate → product | Enzyme | Cofactors / notes |
|---|---|---|---|
| 1 | glucose → glucose-6-phosphate | hexokinase | ATP → ADP · Mg²⁺ |
| 2 | glucose-6-P → fructose-6-P | phosphohexose isomerase | — |
| 3 | fructose-6-P → fructose-1,6-BP | phosphofructokinase | ATP → ADP · Mg²⁺ |
| 4 | F-1,6-BP → DHAP + 3-PG-aldehyde | aldolase | splits between C3 and C4 |
| 5 | DHAP ⇌ 3-PG-aldehyde | triose phosphate isomerase | equilibrium 96% : 4% |
| 6 | 3-PG-aldehyde → 1,3-BPG | phosphoglyceraldehyde dehydrogenase | NAD → NADH₂ · H₃PO₄ · energy captured |
| 7 | 1,3-BPG → 3-phosphoglycerate | phosphoglycerate kinase | ADP → ATP · Mg²⁺ · substrate-level phosphorylation |
| 8 | 3-PGA → 2-PGA | phosphoglycerate mutase | via 2,3-BPG intermediate |
| 9 | 2-PGA → 2-phosphoenolpyruvate | enolase | − H₂O · Mg²⁺ · creates high-energy bond |
| 10 | PEP → pyruvate | pyruvate kinase | ADP → ATP · Mg²⁺/K⁺ · irreversible |
| 11 | pyruvate → acetaldehyde + CO₂ | pyruvate decarboxylase | TPP cofactor · Mg²⁺ · irreversible |
| 12 | acetaldehyde → ethanol | alcohol dehydrogenase | NADH₂ → NAD · redox loop closes |
| Aspect | Aerobic respiration (EMP + TCA) | Alcoholic fermentation (EMP only) |
|---|---|---|
| Oxygen required | Yes — final electron acceptor | No |
| End products | 6 CO₂ + 6 H₂O | 2 ethanol + 2 CO₂ |
| Energy per mol glucose | 2822 kJ | 209 kJ (≈ 96 kJ into ATP, rest lost as heat) |
| ATP yield | 38 ATP | 2 ATP |
| Role in the brewery | Yeast propagation & growth — only a small sugar share needed | Beer production — the main sugar share is fermented |
| Flavour significance | Fuels biomass for clean fermentation | Ethanol + CO₂, plus by-products: higher alcohols, esters, aldehydes, acids, ketones, sulfur compounds |
Why brewers care beyond ethanol: the EMP route is the foundation for many metabolic products, not just alcohol. Every ester, higher alcohol and acid that shapes your beer’s flavour traces back to these intermediates — which is why wort composition, oxygenation and yeast health all express themselves through this single pathway. It also remains one of the most studied reaction sequences in all of brewing chemistry.
Top fermentation uses top-cropping yeast at higher fermentation temperatures (ales, wheat beer, Altbier, Kölsch); bottom fermentation uses bottom-cropping yeast at lower temperatures (lagers, Pilsner, export). The strains and temperatures give the two beer families distinctly different characters.
Yeast is facultative. Oxygen enables aerobic respiration (2822 kJ / 38 ATP per mol glucose) — the energy yeast needs to multiply and build healthy cells. Only a small share of sugar needs to be oxidised aerobically to fuel the entire pitch, which is why wort oxygenation sets fermentation performance for the whole batch.
Only about 209 kJ per mole of glucose, of which roughly 96 kJ is stored in ATP bonds (2 ATP net); the rest is dissipated as heat. That is about 13.5 times less than aerobic respiration — efficient growth simply is not possible without oxygen.
Because GAP — the 4% — is continuously consumed by step 6. Le Chatelier’s principle keeps pulling DHAP into GAP, so the pathway flows at full speed despite the unfavourable equilibrium.
From substrate-level phosphorylation: step 7 (1,3-BPG → 3-PG) and step 10 (PEP → pyruvate) each donate a high-energy phosphate to ADP. Since the split produces two three-carbon molecules, each step fires twice — 4 ATP gross, minus 2 invested in steps 1 and 3, leaves 2 ATP net.
It is the reducing power balance. NADH₂ generated in step 6 is spent reducing acetaldehyde to ethanol in step 12 — regenerating NAD so glycolysis can continue. Without that redox loop, fermentation would halt within seconds.
Glucose always reaches pyruvate via EMP, with or without oxygen. Aerobic conditions then send pyruvate to acetyl-CoA and the TCA cycle for complete oxidation; anaerobic conditions send it to decarboxylation and reduction, i.e. ethanol and CO₂. Same molecule, two destinies.
Yes — higher alcohols, esters, aldehydes, acids, ketones and sulfur compounds. These fermentation by-products determine beer’s flavour, foam, colour and colloidal stability, and they are why the same pathway yields such different beers in different hands.
ZR Brewing builds conical fermenters and complete fermentation systems engineered around the mechanism: precise oxygenation, temperature control for every stage, sanitary yeast-handling geometry and single-vessel flexibility. Fermentation you can reproduce, batch after batch.
Contact us at [email protected] or visit www.zrbrewing.com to spec your fermentation cellar.
24時間以内にご返信いたします。お急ぎの場合は、WhatsAppまたはWeChat(+8613188932181)までご連絡ください。.
*当社はお客様のプライバシーを尊重し、すべての情報を保護いたします。.
お客様の情報は、お問い合わせへの回答にのみ使用し、未承諾のメールや宣伝メッセージを送信することは一切ありません。.