견적 받기
24시간 이내에 답변해 드리겠습니다. 긴급한 사안이신 경우, WhatsApp/WeChat(+8613188932181)으로 연락해 주시기 바랍니다.
*당사는 귀하의 개인정보를 존중하며, 모든 정보는 안전하게 보호됩니다.
당사는 귀하의 정보를 오직 문의에 답변하는 용도로만 사용하며, 원치 않는 이메일이나 홍보 메시지를 절대 보내지 않습니다.
Ethanol and CO₂ are what yeast is hired to produce. But the compounds it makes by accident — diacetyl, higher alcohols, esters, sulphur compounds, organic acids and aldehydes — decide whether your beer tastes clean and full or green and harsh. Did you know the same brew can taste buttery one week and solventy the next, purely because of by-product timing? Some of these trace compounds can be removed by process; others, once formed, are yours forever. Let’s meet the whole flavour family.
During fermentation yeast uses wort nutrients and excretes metabolic products, and these by-products determine whether a beer’s taste is full or thin, clean or flawed. They fall into two families with completely opposite process behaviour:

Diacetyl and 2,3-pentanedione are formed by yeast descendants during fermentation and count as classic fermentation by-products. Both carry vicinal diketone (VDK) groups, so they are collectively called vicinal diketones; chemically similar, they affect beer similarly — an immature, uncoordinated taste and aroma. But 2,3-pentanedione appears at far lower levels and its threshold is about 10× higher, so diacetyl does almost all the damage.
Diacetyl is the most important green-flavour substance in beer, with a taste often described as sweet, milky or like bad butter — hence the nickname “slow-fire flavour”. Its threshold sits at 0.10–0.15 mg/L, and its breakdown runs through the whole beer maturation process. That is why diacetyl is still regarded as the single most important maturity indicator of beer.
Diacetyl is the product of non-enzymatic oxidative decarboxylation of α-acetolactic acid outside the yeast cell. α-Acetolactic acid itself is a precursor yeast excretes while synthesising valine and leucine inside the cell — a branch intermediate of the valine–leucine pathway. It leaks out of the cell, and only then, spontaneously, oxidatively decarboxylates into diacetyl. The removal of that diacetyl, in turn, must happen inside yeast cells via enzymes. And α-acetolactic acid can convert to diacetyl at any moment — for beer quality it is a standing threat: flavourless itself, invisible in analysis, yet always about to become diacetyl.
So the strategy is clear: you cannot prevent α-acetolactic acid formation — you can only accelerate its conversion and re-absorption. The formation mechanism splits into three stages :


Formation depends on five factors:
α-acetolactic acid —(ALDC)→ acetoin (3-hydroxy-2-butanone) → 2,3-butanediol
The four golden rules of diacetyl management:
And one trap: oxygen pickup during the late fermentation stage is dangerous — it generates α-acetolactic acid when formed diacetyl can no longer be fully degraded by yeast, and the oxygen further oxidises existing acetolactic acid into diacetyl. Guard every transfer against air.
“Higher alcohols” are the alcohols with 3 or more carbon atoms — the distilling industry calls them fusel oils. They are a major fermentation by-product and an important building block of beer flavour: in the right range they add harmony and body to aroma and mouthfeel; too much gives a stale, greasy smell and an off, “sharry” nose, ruins foam stability, and — notoriously — causes headaches and hangovers the next morning; too little leaves the beer flat and thin-bodied. For quality pale lagers, controlling higher alcohols at roughly 50–90 mg/L is considered appropriate.
In fermentation, higher alcohol production ranks as: isoamyl alcohol (3-methylbutanol) first — over 50% of the total, then active amyl alcohol (2-methylbutanol), isobutanol and n-propanol. Aromatic impact is dominated by β-phenylethanol and tryptophol, which together with ethanol, esters, acids and polyphenols form the aroma backbone of beer. Higher alcohols are the “headache” offenders: above 120 mg/L total — and especially isoamyl alcohol above 50 mg/L with isobutanol above 10 mg/L — drinkers report the “morning-after” effect, because fusel alcohols metabolise slowly in the human body and stimulate it longer. Brewers and managers should monitor this closely, control it rigorously in-house, and feed market feedback back into strain selection and process improvement.
Formation links tightly to yeast’s amino-acid metabolism: yeast regulates the amino-acid pool first — amino acids are converted to the corresponding α-keto acids, which then become higher alcohols by decarboxylation and reduction. Two routes feed this pool:
① Degradation (Ehrlich) route — ≈80% of amino acids: RCH(NH₂)COOH →(transaminase)→ RCOCOOH → RCHO → RCH₂OH (higher alcohol)② Synthesis route — the last step of yeast building amino acids from sugar: sugar metabolism → α-keto acid → (decarboxylation, −CO₂) → aldehyde RCHO → (+2H, alcohol dehydrogenase) → RCH₂OH (higher alcohol)

Esters are the principal component of beer aroma: tiny in quantity, enormous in impact. The right ester level makes the flavour full and harmonious; excessive esters bring an unpleasant “solvent” or fruity-sour note. Most esters form in primary fermentation along with alcohol formation — after which their share changes only slightly during maturation. Esters arise mainly in yeast’s energy metabolism; in beer they increase only very slowly as wort gravity and ethanol concentration rise.
Beer is now known to contain about 90 different esters, of which six matter most for flavour: ① ethyl acetate; ② ethyl isovalerate; ③ ethyl isobutyrate; ④ β-phenylethyl acetate; ⑤ hexyl (caproate) acetate; ⑥ phenethyl (and other) esters.
Ester content depends chiefly on wort gravity and beer type: top-fermented beers can reach 80 mg/L; bottom-fermented beers about 60 mg/L. The thresholds and normal ranges of the individual esters tell you how loud each one speaks:
| Ester | Threshold (mg/L) | Light beer | Domestic famous lager | Character |
|---|---|---|---|---|
| Ethyl acetate | 50 (light-beer basis 30) | 18–25 | 25–30 | sweet-solventy, fruity |
| Ethyl isovalerate | 10 | 1–5 | 0.5–2 | papaya/ banana fruitiness |
| Ethyl isobutyrate | 8 | 1–5 | ≈0.5 | fruity, rummy |
| β-Phenylethyl acetate | 2 (4.7) | 1–5 | 1–15 | roses, honey — strong aroma |
| Butyl acetate | 0.5 | 0.1–0.2 | ≈0.1 | solventy |
| Isoamyl acetate | 0.03 | 0.05–0.1 | 0.1 | banana — very loud |
| Hexyl acetate | 0.3 | 0.1–0.6 | 0.3–0.5 | apple-like |
| Octyl acetate | 4.0 | 0.2–0.6 | 0.1–0.5 | fruity-floral |
| Ethyl lactate | 15 | 1–5 | 2–3 | acid-fruity |
| Ethyl phenylacetate | 5 | 0.2–1.5 | 1–2 | honey, rose |
| Total esters | — | 25–75 | 20–35 | cannot be masked once off-flavour |
Note: ethyl acetate, ethyl isovalerate and 4-vinylguaiacol are the signature components of wheat-beer aroma; bracketed values refer to wheat-beer thresholds.
Sulphur is an indispensable trace element for yeast growth and metabolism, but some of its metabolic products bring flavour faults when excessive. Beer sulphur compounds split into non-volatile (94%, modest flavour impact — but the reservoir feeding the volatile pool) 그리고 volatile (6%, big impact, low thresholds — microgram changes move beer quality). Volatile sulphur off-notes can also come from heat-resistant bacterial contamination. The main volatile players: hydrogen sulphide (H₂S), dimethyl sulphide (DMS), thiols (R–SH), sulphur dioxide (SO₂) and methyl-sulphur compounds. Their thresholds are startlingly low:
| Compound | Threshold | In quality beer | Flavour impact when over |
|---|---|---|---|
| H₂S (hydrogen sulphide) | 5–10 µg/L | 1–5 µg/L | >10 µg/L: raw-egg, onion; >10 mg/L: unpleasant |
| SO₂ (sulphur dioxide) | 10 mg/L | <8 mg/L | sunlight-struck character |
| CH₃SH (methanethiol) | 5–10 µg/L | 1–2 µg/L | sunlight-struck character |
| CH₃CH₂SH (ethanethiol) | 5–10 µg/L | 1–2 µg/L | onion-garlic, putrid |
| CH₃SCH₃ (DMS, dimethyl sulphide) | 30–50 µg/L | <30 µg/L | corn / cooked-vegetable “malty-sweet” taint |
A little of these compounds is a necessary part of certain beer styles; excess is always harmful. Yeast needs sulphur to build cell protein, coenzyme A, glutathione and thiamine — so some sulphur presence as sulphur-containing amino acids is unavoidable, and most non-volatile sulphur compounds can be washed out through fermentation with CO₂.
Most beer sulphides come from yeast assimilation of cysteine, sulphate and sulphite, plus sulphate-reducing bacteria’s metabolic intermediates. H₂S formation depends on strain, wort sulphur-amino-acid content and fermentation temperature, and it decreases as CO₂ is scrubbed out during fermentation. Yeast’s own “autolyzed-yeast” smell is mainly H₂S — CO₂ washing lowers it. Different strains differ hugely in H₂S production: bottom-fermenting yeasts make more than top-fermenters; in general strains with poor vitality produce more H₂S, and H₂S output correlates with yeast propagation activity — higher growth rates mean more H₂S.
SO₂ reaches about 20 mg/L in primary fermentation and falls during secondary fermentation; reducing sugar content and CO₂ washing both lower free SO₂. SO₂ arises from yeast sulphite assimilation and plays a role in beer’s redox system — but excessive SO₂ risks a harsh “sunlight” note.
DMS spoils beer’s aroma chemistry: the SH group in sulphides reacts readily with beer’s sulphur-containing amino acids, producing 3-methyl-2-butene-1-thiol — the infamous “sunlight-struck” (skunky) smell. DMS itself gives the “malty-sweet”/corn/cooked-vegetable taint. Its formation pathway : DMS precursor (DMS-P) in the malt splits thermally during wort boiling into free DMS (partly stripped by evaporation), while another share is oxidised to DMSO — which yeast re-reduces back to DMS during fermentation.

Beer contains more than 100 organic acids. Most originate in yeast metabolism — acids carry a sour taste and are precisely the substances that harmonise beer’s flavour: together with ethanol they form ester aftertaste, and suitable acidity makes beer taste refreshing rather than flat. Acids from wort (malic acid, pyruvic acid, citric acid and friends) set the base; acids from yeast metabolism matter even more for balance. Too little acidity leaves beer coarse, unharmonious and “rough”; too much tastes sour and thin, with poor foam.
Total acidity in beer is usually controlled at 1.7–2.3 mL NaOH. Production is affected by raw material, mashing method, fermentation conditions, yeast strain and more. The main members: pyruvic, citric, malic, succinic, lactic and higher fatty acids (C₆–C₁₈), plus unfermented lactic, succinic and oxalic acids.
| Acid | Threshold (mg/L) | Normal content (mg/L) | Titration (mmol/L NaOH diff.) |
|---|---|---|---|
| Lactic acid | 4.7 | 4–12 | 0.044–0.13 |
| Citric acid | 16 | 25 | 0.234 |
| Pyruvic acid | 25 | 15 | 0.04 |
| Malic acid | 7.0 | 3.5 | 0.05 |
| Succinic acid | 60 | 10 | 0.28 |
| Acetic acid | 10 | 8 | 0.1 |
| C₆–C₁₀ fatty acids | 8–16 | 8–4 (band) | 0.2 |
Beer acids come from three sources: ① the raw material — malt; ② hops; ③ yeast metabolism. The fatty acids in wort come mostly from malt, largely as long-chain unsaturated fatty acids; hops contribute small amounts of valeric, isovaleric and 2-methylbutyric acids. Most organic acids come from yeast’s EMP pathway. Acetic acid is the most abundant organic acid in beer — a product of normal beer fermentation, formed by acetaldehyde oxidation; bottom-fermented beers carry roughly one-third more acetic acid than top-fermented ones. Besides acetic acid, lactic acid is comparatively high; the formation of these acids parallels higher-alcohol formation during the first 4 days of primary fermentation — their precursors are the corresponding aldehydes. Fast fermentation methods (higher temperature, higher pitch, more aeration, stirring) raise the acid number — and fatty-acid levels in fast-fermented beer run about one-third lower than in conventionally fermented beer.
Beer contains several carbonyl compounds — aldehydes and ketones — whose flavours are highly objectionable; aldehydes form one important group of beer volatiles.
| Aldehyde | Threshold (mg/L) | Content range | Normal content |
|---|---|---|---|
| Acetaldehyde | 15 | 3–35 | 6–8 |
| Propanal | 5 | 0.1–0.5 | 0.2–0.3 |
| Isobutyraldehyde | 1 | 0.1–0.5 | 0.2–0.3 |
| Isovaleraldehyde | 0.5 | 0.05–0.2 | 0.1 |
| n-Valeraldehyde | 0.1 | 0.05–0.1 | 0.05–0.07 |
| n-Hexanal | 0.4 | 0.05–0.3 | 0.1–0.2 |
| Furfural | 50 | 0.2–10 | 0.5–2 |
Acetaldehyde is the main aldehyde of beer fermentation and the most abundant — the intermediate of yeast’s ethanol fermentation, formed by pyruvate decarboxylation:
CH₃COCOOH —(decarboxylation)→ CH₃CHO (acetaldehyde)
Acetaldehyde forms in large quantities at the start of primary fermentation and falls rapidly afterwards. Bottom fermentation reaches its acetaldehyde maximum at 35%–60% apparent attenuation, top fermentation at about 10%. Its threshold is 10 mg/L — above that, beer takes on a coarse, greener grain taste; at high levels a pungent, rotten-apple/grassy note. Normal beer stays under 10 mg/L; quality beer sits in the 1.5–2.5 mg/L band. In immature beer, acetaldehyde coexists with diacetyl and H₂S to build the green-beer character. Fermentation temperature, pressure, wort pH and pitching rate all shape acetaldehyde: higher temperature → less acetaldehyde; higher pressure → more; higher wort pH → more; higher pitching rate → more. So in late fermentation, adjust temperature and pressure to bring acetaldehyde to its normal level. During maturation acetaldehyde falls rapidly with CO₂ scrubbing — especially at packaging; CO₂ washing removes acetaldehyde too. Wort contamination or infected yeast also increases it.

The flavour-active substances in beer (see Table 4-9) influence quality enormously, and their levels link directly to fermentation process conditions. Measuring them lets you diagnose the process — and change it where it hurts:
| Substance | Normal (mg/L) | Threshold | Character | What it indicates |
|---|---|---|---|---|
| Isoamyl alcohol | 5–20 | 10–200 | solventy, fatty | fermentation control — strain & temperature |
| 2-Methylbutanol / n-propanol / β-phenylethanol | 10–20 / 5–20 / 10–50 (wheat: 30–50) | 50–65 / 50–75 | alcohol, solventy, rose-like | fermentation control — strain & temperature |
| Ethyl acetate | 5–30 | 25–30 | fruity-solventy | fermentation control; wheat-beer signature (esters group) |
| Ethyl isovalerate | <0.1 | 0.4–1.6 | papaya fruitiness | |
| 2-Phenylethyl acetate | 0.5–2.5 | 1–1.6 | roses, honey | |
| Butyric / isovaleric / hexanoic acids | <0.3 / 0.1–0.3 / 0.1–0.3 | ≈0.4 / 1.2–2.2 / 3.5 | sweaty, old-hop, cheese | old hops, infected yeast; lauter & fermentation control |
| Hop components: humulones / linalool | 0.005–0.03 / 0.1 | 0.05–0.08 | hop oil, floral-woody | hop dosage & hopping method |
| Heat-load indicators: furfural / 2-furfuryl methyl (maillard) | <0.1 / 0.5–3 | >3000 (heat) | burnt, woody | heat load — wort boiling & handling of the wort |
| Maturation indicators: diacetyl / 3-hydroxy-2-butanone (acetoin) / DMS | <0.1 / <3 / 0.03–0.12 | 0.10–0.15 / 8–20 / 0.10–0.12 | yellow-fruit / fruity / celery | maturation degree; after-boiling process control |
Reading the table like a dashboard: fusels point at strain/temperature; esters at fermentation vigour; fatty acids at hop freshness and hygiene; furfural at heat load in the brewhouse; VDK and DMS at maturation quality. One sample, five diagnoses.
Its threshold is only 0.10–0.15 mg/L and it gives an immediate buttery “green” impression. Because its precursor α-acetolactic acid keeps converting into diacetyl outside the cell, total VDK + precursor below 0.10 mg/L is the accepted maturity standard.
The precursor α-acetolactic acid forms inside the cell (valine/leucine synthesis branch), is excreted, and oxidatively decarboxylates spontaneously outside the cell. The resulting diacetyl must then be re-absorbed and reduced enzymatically inside yeast cells.
Control apparent extract at 45%–55% before raising temperature, then run a warm VDK-reduction phase (up to 18 °C for bottom-fermenting beer). Diacetyl breakdown is strongly temperature-driven.
α-Acetolactate decarboxylase converts α-acetolactic acid directly to acetoin and 2,3-butanediol, bypassing diacetyl entirely. Effective and viable — at the cost of added enzyme and some influence on yeast metabolism.
Higher alcohols — fusels. Above 120 mg/L total, with isoamyl alcohol above 50 mg/L and isobutanol above 10 mg/L, their slow human metabolism and longer stimulation produce the “morning-after” effect.
Flocculent strains (22–49 mg/L) versus powder-type strains (69–90 mg/L). Combine with pitching (1.5–1.8)×10⁷ cells/mL, multiplication within 4×, and low-temperature primary fermentation.
Top-fermenting yeast esterifies far more than bottom-fermenting yeast — wheat-beer yeasts are selected specifically for their ethyl acetate, isoamyl acetate and 4-vinylguaiacol signature.
Attack it along the whole chain: low-protein barley and low-temperature kilning (less DMS-P), strong boil evaporation, mashing pH 5.2–5.5, sulphide-hungry yeast strains, controlled aeration and pitching, and CO₂ washing — which alone cuts DMS about 50%.
Diacetyl schedules, fusel control and ester balance are decided by temperature precision, pressure control and yeast management — all equipment questions. ZR Brewing builds conical fermenters and complete fermentation systems engineered for repeatable flavour profiles.
Questions about fermentation control or brewhouse design? Contact us at [email protected] 또는 다음을 방문하세요 www.zrbrewing.com.
24시간 이내에 답변해 드리겠습니다. 긴급한 사안이신 경우, WhatsApp/WeChat(+8613188932181)으로 연락해 주시기 바랍니다.
*당사는 귀하의 개인정보를 존중하며, 모든 정보는 안전하게 보호됩니다.
당사는 귀하의 정보를 오직 문의에 답변하는 용도로만 사용하며, 원치 않는 이메일이나 홍보 메시지를 절대 보내지 않습니다.